RF Accessories

Home

Shop

RF Accessories

RF accessories including multiswitches, splitters and combiners

10dB Line Attenuator

$10.00

Use this attenuator to ensure optimum signal level is presented at the receiver input. Can also be used to balance input levels to mixers, combiners and line amplifiers etc. Unit is weatherproof and DC power passing. Cat# X1400.
[Product Details...]

15-18dB Line Amplifier

$25.00

This model is line powered, rated from 900-2050 MHz with sloped gain to compensate for RG-6/U cable. Sealed diecast enclosure ensured good EMI immunity and allows outdoor use provided normal weatherproofing techniques are used.Cat # X1415.
[Product Details...]

2 Way Coaxial Switch

$32.00

The perfect answer to feeding a single input receiver from 2 dishes, this coaxial switch can handle LNB voltage and IF signals to 2050 MHz. It uses a solid push-button constant contact switching mechanism to ensure reliable switching. Cat# S2000.
[Product Details...]

2 Way Splitter

$10.00

2 Way splitter, single port power pass, 5-2150MHz. Diecast housing, weatherproof. Cat# X1551.
[Product Details...]

20dB In Line Attenuator

$12.00

This low profile 20dB in line attenuator is great for balancing up RF systems where you have to much signal. This attenuator is rated up to 3GHz.
[Product Details...]

22KHz Switch

$20.00

This switch can be used with any 22KHz equipped receiver to double the number of receiver inputs. It can be used to switch between LNBs, or between 2 dishes whilst maintaining 14/18v polarity switching function. Cat# P1625.
[Product Details...]

4 Way DiSEqC Switch

$5.00

Use this switch for control of up to 4 dishes. Simply program the satellite receiver for DiSEqC 1,2,3,or 4 depending upon the desired dish. Cat# P1626.
[Product Details...]

6 Way Splitter

$20.00

This splitter allows up to 6 extra ports to be split from the one cable. The diecast case provides good interference protection Cat# 1556
[Product Details...]

8 Way Splitter

$25.00

8 Way Splitter, single port power pass,F type connecters, diecast enclosure for high RFI immunity. Cat # X1558.
[Product Details...]

Bandpass IF Filter

$40.00

This is our new model IF filter with a bandpass to give protection against interfering frequencies above 950MHz (4.2GHz).
[Product Details...]

Belden RG-6 Quad Shield Coax ( 25m length with connectors )

$20.00

Belden Series 6, 18 AWG solid .040" bare copper or bare copper-covered steel conductor (see below), gas-injected foam polyethylene insulation, Duobond® II + aluminum braid shield (60% coverage), PVC jacket.
[Product Details...]

Bull Nose Wall Plate

$12.00

This bull nose wall plate is very handy for jobs that require several Cat 5/6 or coax connections to exit a wall cavity neatly. Not having to terminate each individual cable will save you time whilst not compromising on quality.
[Product Details...]

Cable RG -174

$13.50

This 500mm length of RG-174 is ideal for interconnecting 2 pieces of equipment where a short light flexible connection is required and RG6 is too bulky. Terminated at both ends with F type male plug with gold centre connector.
[Product Details...]

De Modulator

$199.00

This unit is perfect for use with Plasma or LCD monitors. It takes an RF signal and turns it into Video and mono Audio with adjustable Video and Audio control. The unit uses a 12 Volt regulated supply and also has 12 Volt loop through. A 2 digit LED displ
[Product Details...]

Dual Band Combiner

$49.00

Allows combination of C and K band signals down the one cable by mixing one input with and internal 600MHz oscillator. This presents 2 "blocks" of signal at the output port, one covering 950-1450MHz, the other covering 1500-2050MHz.
[Product Details...]

Dual Band Combiner PLL Version

$99.00

PLL version of the dual band combiner
[Product Details...]

Oarsman Sat & TV Mixer

$20.00

Mixers are used to combine satellite IF (950-2000MHz) and TV Ariel or RF( 5-800MHz) down the once cable. A second mixer at the receiver ensures frequency seperation and single port power passing.
[Product Details...]

Power Inserter

$44.00

Rated from 950 to 1750MHz, can be supplied with an 18V DC 300mA regulated power adaptor making it suitable for powering the LNB in a satellite receiving system. IF output is capacitively coupled to ensure there is no DC return to the receiving equipment.C
[Product Details...]

RG-6 Cable Stripper

$22.00

Easy to use rotary stripper ensures properly prepared cable every time. The two internal blades have adjustable location and cutting depth for different types of cable. Preset for RG6 quad shield cable. Cat# C1008.
[Product Details...]

Scart Adapter Plug

$8.00

This adapter can be used for either input or output use, by sliding the switch to the correct position. Perfect for use with Foxtel boxes or european televisions. Cat# C1302.
[Product Details...]