Description
The PBI DCH-3200P VSAT Professional Satellite Receiver is a cost effective professional satellite receiver for use in a wide range of television and radio broadcast applications including the Australian Viewer Access Satellite Television (VAST) system. The PBI DCH-3200P VAST Professional Satellite Receiver has been thoroughly tested by Av-Comm’s technicians on the VAST platform and installed in radio stations and remote self help transmitter sites throughout Australia. The 3200 series utilises an Single Channel VAST CAM* to decode the desired service from the VAST platform which is outputted via the PBI 3200 professional satellite receivers video and audio outputs.
Av-Comm has developed a specific firmware version for the PBI DCH-3200P VAST Professional Satellite Receiver than ensures after a power cycle, power reboot, or rain outage the decoder restores the previous program and audio settings. This means you no long have to drive for hundreds of kilometers to reset the channel or the audio level of the decoder.
Additionally, the PBI DCH-3200P Professional Satellite Receiver provide a web GUI and status/health monitoring via SNMP. This allow for the satellite decoder to be remotely managed and monitored 24/7 via an internet connection. The PBI DCH-3200P VAST Professional Satellite Receiver is a must for any professional VAST satellite system.
*Single Channel VAST CAM not included.
PBI DCH-3200P Series IRD Features:
- DVB-S/S2 Tuner
- DVB-T Tuner (optional)
- DVB-C Tuner (optional)
- MPEG 2/4 AVC/H.264 Decoding
- 4:2:0 Decoding
- 2 x Conditional Access (CI) Slots
- Web Management via ethernet
- TS/IP output (optional)
Output Formats:
- CVBS – Composite Video
- Balanced Audio (XLR/Cannon Audio Connectors)
- Unbalanced Audio (RCA Audio Connectors)
- HDMI
- YPbPr
- ASI In/Out (optional) DCH-3200P-20S2 Model
- Satellite IF Loop Through
Features
• Variety of inputs (optional) DVB-T2/T/C, DVB-S2/S, DTMB, ASI and TS/IP
• 2 x DVB-CI Slots, Multi Programs, BISS-1 and BISS-E decryption
• MPEG-2, MPEG-4/H.264, AVS+ and H.265 digital video decoding • Digital and analog video outputs: HDMI and CVBS
• Two digital audio channels decoding of MPEG1 Layer II, AAC and AC3 Dolby Digital
• One Balanced Audio • UDP/RTP, Unicast/Multicast, and SPTS/ MPTS over IP (full duplex, optional)
• Remote Control and Supervision by SNMP, HTTP WEB and TRAP
• Dynamic PMT auto detection and updating
• Support VBI TELETEXT, EBU/ DVB Subtitle, Closed Caption • Configuration save and load after power off